Skip to content
English
  • There are no suggestions because the search field is empty.

How do I download and connect using the iPad's VIEW Air app?

  1. Configure EYE MINI to broadcast its access point
    1. Enter the EYE MINI's Settings within the MENU
    2. Go to page 3, and configure the Wi-Fi setting to be "AP(Access Point)"
    3. Press BACK to save your changes
  2. Connect to VIEW Air app
    1. If not already installed, then download & install the VIEW Air app on your iPad from the App Store
    2. If EYE MINI is in AP mode, scan the on-screen QR code from the EYE MINI's MENU page with your iPad to establish a connection
    3. Open the VIEW Air app, select your EYE MINI from the list, and tap Connect; you should see a green "LINKED" icon in the top-right corner of the app if successful
    4. If you have not already added your user profile, then do so now
    5. Select your user profile, and tap Start to begin using VIEW Air
  3. (Optional) Connect EYE MINI to Wi-Fi
    1. Tap the gear icon at the top of VIEW Air, then press Scan Wi-Fi
    2. Choose your Wi-Fi network, enter your password, and tap Connect
    3. If successful, this will switch your EYE MINI's Wi-Fi setting back to "Station(Client)", allowing you to connect over your Wi-Fi in the future
      1. To confirm this, you should see appear on the top-right of your EYE MINI screen a Wi-Fi icon (indicating connection over Wi-Fi instead of AP) and a globe icon; if the globe is not crossed out, you are connected to the internet

Should you experience any issues with connecting the EYE MINI to iPad, or connecting it to Wi-Fi/internet, then make sure your EYE MINI is up-to-date by following the How do I update my launch monitor firmware/driver? article.