Skip to content
English
  • There are no suggestions because the search field is empty.

How do I update my launch monitor firmware/driver?

EYE MINI Launch Monitor

To update your EYE MINI launch monitor through the Uneekor Launcher management software, firmware version 2.2.8 or higher must be installed, otherwise we will need to send you a USB flash drive to update it with. If the installed version meets this requirement, then you can perform a firmware for the launch monitor through the Uneekor Launcher management software by following these steps:

  1. Navigate to the EYE MINI launch monitor's Settings
  2. On Page 3 of the Settings, set Ethernet to Static, Wi-Fi to Station(Client)
  3. Power cycle the launch monitor
  4. Connect the launch monitor to the PC via Ethernet cable
  5. Go to the Start menu in the Uneekor Launcher management software
  6. Click the Updates button within the EYE MINI tile
  7. Install the latest version


To update your EYE MINI launch monitor through the onboard updater, firmware version 2.3.28 or higher must be installed, otherwise you may need to update through the Uneekor Launcher management software first. If the installed version meets this requirement, then you can perform an onboard firmware update by following these steps:

  1. Navigate to the MENU on the EYE MINI
  2. Navigate to Updates
  3. Ensure that your EYE MINI is connected to the internet (top-right globe icon should not have a slash through it)
  4. Update to the latest version

All Other Launch Monitors

To update your launch monitor, simply follow these steps:

  1. Open the Uneekor Launcher management software
  2. Navigate to the Start menu
  3. Click the Updates button within the launch monitor tile
  4. Install the latest version